29 dimensions are shown in mm dimensions subject to change www.ittcannon.com contacts copper alloy plating contact area : gold alloy inlay terminals : tin lead (2 min) moldings high temp. thermoplastic ul 94v-0 rated number of contacts 6, 8 mechanical life 50,000 cycles min contact force 0.25 n min / 0.5 n max card detection switch 0.8 n max for actuation (end travel switch actuation force actuates when card is 0,9 mm from card stop) 1.8 n max for complete depression vibration frequency 10 to 500 hz. acceleration 50m/s 2 duration 6 hours - amplitude 0,35 mm max electrical discontinuity 1? shock peak value 500 m/s 2 ?duration 11 ms 3 shocks in each direction of each axis max electrical discontinuity 1 ? insulation resistance 1,000 m ? min resistance 100 m ? max current rating 10 ? min / 1 a max dielectric strength 750 vrms min card detection switch normally open (closes on card insertion) contact resistance 100m ? max dielectric strength 250 vrms min current rating 1 ma min/ 10 ma max maximum power 0.2 va operating temperature -40? to +85? soldering temperature temperature/time pro?e acc. to cecc00802 para. 6.1, fig. 3 with peak temperature 250? damp heat iec 512 test number 11c (10 days) salt mist iec 512 test number 11f (96 hours) card detection switch sealed ip 54 for ccm04 1889 sealed against dust for other versions 5 reels per box. ccm04 mkii the ccm04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided by the connector itself). the ccm04 low pro?e without card guidance is dedicated to applications where the overall height of the connector is paramount. a range of low pro?e ccm04 connectors are available with 1.25 mm thick moldings. the wide choice of contact con?ura- tions and molding heights suit a broad range of applications. features ?available in two molding heights 1,25 mm and 2,75 mm. ?the integrated card detection switch (optional) is sealed against dust and grit. ?by using an inlay ?ish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating. ?the height of the contact above the insulator is 0,75 mm, allowing a wider tolerance for the card entry slot. ?the contact area is spooned to reduce the risk of accidental (or deliberate) damage and to optimize the electrical connection with the card. ?the tip of the contact is protected by the molding so that it cannot catch on the card as the card is being inserted. ?the contact design ensures a consistent and reliable contact force over the life of the connector. ?robustly formed printed circuit tails are well protected by the insulator body. ?the moldings are made from high temperature thermoplastic suited for infrared and convection soldering processes. ?with tape and reel packaging as standard, the connectors are designed to be automatically picked & placed. construction mechanical data contact electrical data switch electrical data environmental data ordering code part number number of contacts card presence quantity per reel switch ccm04-1801 6 no 1800 ccm04-1814 8 no 1300 CCM04-1889 8 yes 1000 ccm04-1316 8 yes 700 ccm04-1317 8 yes 700 packaging
30 dimensions are shown in mm dimensions subject to change www.ittcannon.com dimensional drawings (ref.) 25,5 0,1 0 -0,1 0,8 (ref.) 1 ,78 2,54 2,54 2,54 (ref.) 1,78 1 0,3 a 1,25 0,05 0,75 25,5 0,2 0,25 0,05 3,81 3,81 2,54 2,54 2,54 r 0,1 30 ? 0' mated condition 8x see detail a xx-xxx date code area pick and place area 3,5 detail a ccm04-1814 2 x 4 contacts 2,5 25,5 5,5 5,5 3,81 3,81 1,8 7,79 1,5 23,2 1,5 2,54 2,54 1,3 0,2 2,54 (component side) contact location according to iso 7816-2 & env 1375-1 & gsm11-11 c5 c1 c6 c2 c7 c3 contact foot area 0,8 x 1 prohibited area 8x c8 c4 plastic outline pad 0,9 0,25 0,75 16,2 0,95 0,2 5,9 0,75 +0,10 -0,05 15,45 11,8 11,18 a 23,6 25,5 0,2 4,4 0,2 10,9 0,25 0,05 1,25 0,05 30 ? 0' 3,81 3,81 (ref.) 25,5 085 0,85 0,8 (ref.) 4,4 0 -0,1 detail a mated condition see detail a xx-xxx card stop date code area pick and place area 3,5 see detail b 5,5 2,5 5,5 1,8 4,4 25,5 7,99 5,59 1,3 0,2 23,2 1,5 1,5 4,4 1,5 3,81 3,81 1,27 5x 2,54 contact location according to iso 7816-2 contact foot area 0,8 x 1 (component side) 10x c1 c5 c2 c6 c3 c7 c4 c8 sw sw prohibited area pad plastic outline ccm04-1814 pcb layout CCM04-1889 2 x 4 contacts + switch CCM04-1889 pcb layout unless otherwise stated, tolerances are 0,10 mm ccm04 mk ii
ccm04 mk ii 31 dimensions are shown in mm dimensions subject to change www.ittcannon.com dimensional drawings ccm04-1316 2 x 4 contacts ccm04-1316 pcb layout ccm04-1317 2 x 4 contacts + switch ccm04-1317 pcb layout unless otherwise stated, tolerances are 0,10 mm
|
